285/50R16 vs 265/50R16
Going from one to the other changes the overall height by -2.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/50R16 | 265/50R16 | Change |
|---|---|---|---|
| Overall height | 27.2" | 26.4" | -2.9 % |
| Sidewall | 5.61" | 5.22" | -7.0 % |
| Section width | 285 mm | 265 mm | -7.0 % |
| Circumference | 85.5" | 83.0" | -2.9 % |
| Revs per mile | 741 | 763 | +2.9 % |
| Axle height | 13.61" | 13.22" | -10.0 mm |
| Approved rim width | 8–10.5" | 7.5–9.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/50R16. Fit 265/50R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.1 mph | -0.9 |
| 50 mph | 48.6 mph | -1.4 |
| 70 mph | 68.0 mph | -2.0 |
| 90 mph | 87.4 mph | -2.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,711 on the road, so it over-counts by 289. At a true 70 mph the first turns 864 times a minute, the second 890.
What drivers reported
Nobody has filed a complaint naming 285/50R16. 265/50R16 carries 2.