285/50R23 vs 265/55R23
Going from one to the other changes the overall height by +0.7 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/50R23 | 265/55R23 | Change |
|---|---|---|---|
| Overall height | 34.2" | 34.5" | +0.7 % |
| Sidewall | 5.61" | 5.74" | +2.3 % |
| Section width | 285 mm | 265 mm | -7.0 % |
| Circumference | 107.5" | 108.3" | +0.7 % |
| Revs per mile | 589 | 585 | -0.7 % |
| Axle height | 17.11" | 17.24" | +3.3 mm |
| Approved rim width | 8–10.5" | 7.5–9.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/50R23. Fit 265/55R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.2 mph | +0.2 |
| 50 mph | 50.4 mph | +0.4 |
| 70 mph | 70.5 mph | +0.5 |
| 90 mph | 90.7 mph | +0.7 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,075 on the road, so it under-counts by 75. At a true 70 mph the first turns 688 times a minute, the second 682.