285/50R23 vs 295/45R23
Going from one to the other changes the overall height by -2.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/50R23 | 295/45R23 | Change |
|---|---|---|---|
| Overall height | 34.2" | 33.5" | -2.2 % |
| Sidewall | 5.61" | 5.23" | -6.8 % |
| Section width | 285 mm | 295 mm | +3.5 % |
| Circumference | 107.5" | 105.1" | -2.2 % |
| Revs per mile | 589 | 603 | +2.2 % |
| Axle height | 17.11" | 16.73" | -9.8 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/50R23. Fit 295/45R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.9 mph | -1.1 |
| 70 mph | 68.4 mph | -1.6 |
| 90 mph | 88.0 mph | -2.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,776 on the road, so it over-counts by 224. At a true 70 mph the first turns 688 times a minute, the second 703.