285/55R19 vs 295/50R19
Going from one to the other changes the overall height by -2.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/55R19 | 295/50R19 | Change |
|---|---|---|---|
| Overall height | 31.3" | 30.6" | -2.3 % |
| Sidewall | 6.17" | 5.81" | -5.9 % |
| Section width | 285 mm | 295 mm | +3.5 % |
| Circumference | 98.5" | 96.2" | -2.3 % |
| Revs per mile | 643 | 659 | +2.3 % |
| Axle height | 15.67" | 15.31" | -9.3 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/55R19. Fit 295/50R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.8 mph | -1.2 |
| 70 mph | 68.4 mph | -1.6 |
| 90 mph | 87.9 mph | -2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,768 on the road, so it over-counts by 232. At a true 70 mph the first turns 751 times a minute, the second 769.