285/60R16 vs 295/60R16
Going from one to the other changes the overall height by +1.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/60R16 | 295/60R16 | Change |
|---|---|---|---|
| Overall height | 29.5" | 29.9" | +1.6 % |
| Sidewall | 6.73" | 6.97" | +3.5 % |
| Section width | 285 mm | 295 mm | +3.5 % |
| Circumference | 92.6" | 94.0" | +1.6 % |
| Revs per mile | 684 | 674 | -1.6 % |
| Axle height | 14.73" | 14.97" | +6.0 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/60R16. Fit 295/60R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.5 mph | +0.5 |
| 50 mph | 50.8 mph | +0.8 |
| 70 mph | 71.1 mph | +1.1 |
| 90 mph | 91.4 mph | +1.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,160 on the road, so it under-counts by 160. At a true 70 mph the first turns 799 times a minute, the second 786.