285/60R20 vs 295/55R20
Going from one to the other changes the overall height by -2.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/60R20 | 295/55R20 | Change |
|---|---|---|---|
| Overall height | 33.5" | 32.8" | -2.1 % |
| Sidewall | 6.73" | 6.39" | -5.1 % |
| Section width | 285 mm | 295 mm | +3.5 % |
| Circumference | 105.1" | 103.0" | -2.1 % |
| Revs per mile | 603 | 615 | +2.1 % |
| Axle height | 16.73" | 16.39" | -8.8 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/60R20. Fit 295/55R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.4 mph | -0.6 |
| 50 mph | 49.0 mph | -1.0 |
| 70 mph | 68.6 mph | -1.4 |
| 90 mph | 88.1 mph | -1.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,794 on the road, so it over-counts by 206. At a true 70 mph the first turns 703 times a minute, the second 718.
What drivers reported
285/60R20 carries 10 complaints. Nobody has filed one naming 295/55R20.