285/60R24 vs 275/65R24
Going from one to the other changes the overall height by +1.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/60R24 | 275/65R24 | Change |
|---|---|---|---|
| Overall height | 37.5" | 38.1" | +1.6 % |
| Sidewall | 6.73" | 7.04" | +4.5 % |
| Section width | 285 mm | 275 mm | -3.5 % |
| Circumference | 117.7" | 119.6" | +1.6 % |
| Revs per mile | 538 | 530 | -1.6 % |
| Axle height | 18.73" | 19.04" | +7.8 mm |
| Approved rim width | 8–10.5" | 7.5–10" | overlap 8–10" |
Both are approved on a rim 8" to 10" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/60R24. Fit 275/65R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.5 mph | +0.5 |
| 50 mph | 50.8 mph | +0.8 |
| 70 mph | 71.1 mph | +1.1 |
| 90 mph | 91.5 mph | +1.5 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,163 on the road, so it under-counts by 163. At a true 70 mph the first turns 628 times a minute, the second 618.