285/60R24 vs 295/60R24
Going from one to the other changes the overall height by +1.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/60R24 | 295/60R24 | Change |
|---|---|---|---|
| Overall height | 37.5" | 37.9" | +1.3 % |
| Sidewall | 6.73" | 6.97" | +3.5 % |
| Section width | 285 mm | 295 mm | +3.5 % |
| Circumference | 117.7" | 119.2" | +1.3 % |
| Revs per mile | 538 | 532 | -1.3 % |
| Axle height | 18.73" | 18.97" | +6.0 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/60R24. Fit 295/60R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.4 mph | +0.4 |
| 50 mph | 50.6 mph | +0.6 |
| 70 mph | 70.9 mph | +0.9 |
| 90 mph | 91.1 mph | +1.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,126 on the road, so it under-counts by 126. At a true 70 mph the first turns 628 times a minute, the second 620.