285/65R19 vs 295/65R19
Going from one to the other changes the overall height by +1.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/65R19 | 295/65R19 | Change |
|---|---|---|---|
| Overall height | 33.6" | 34.1" | +1.5 % |
| Sidewall | 7.29" | 7.55" | +3.5 % |
| Section width | 285 mm | 295 mm | +3.5 % |
| Circumference | 105.5" | 107.1" | +1.5 % |
| Revs per mile | 600 | 591 | -1.5 % |
| Axle height | 16.79" | 17.05" | +6.5 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/65R19. Fit 295/65R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.5 mph | +0.5 |
| 50 mph | 50.8 mph | +0.8 |
| 70 mph | 71.1 mph | +1.1 |
| 90 mph | 91.4 mph | +1.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,152 on the road, so it under-counts by 152. At a true 70 mph the first turns 701 times a minute, the second 690.