285/65R22 vs 265/65R22
Going from one to the other changes the overall height by -2.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/65R22 | 265/65R22 | Change |
|---|---|---|---|
| Overall height | 36.6" | 35.6" | -2.8 % |
| Sidewall | 7.29" | 6.78" | -7.0 % |
| Section width | 285 mm | 265 mm | -7.0 % |
| Circumference | 114.9" | 111.7" | -2.8 % |
| Revs per mile | 551 | 567 | +2.8 % |
| Axle height | 18.29" | 17.78" | -13.0 mm |
| Approved rim width | 8–10.5" | 7.5–9.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/65R22. Fit 265/65R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.2 mph | -0.8 |
| 50 mph | 48.6 mph | -1.4 |
| 70 mph | 68.0 mph | -2.0 |
| 90 mph | 87.5 mph | -2.5 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,720 on the road, so it over-counts by 280. At a true 70 mph the first turns 643 times a minute, the second 662.