285/70R19 vs 295/65R19
Going from one to the other changes the overall height by -1.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/70R19 | 295/65R19 | Change |
|---|---|---|---|
| Overall height | 34.7" | 34.1" | -1.8 % |
| Sidewall | 7.85" | 7.55" | -3.9 % |
| Section width | 285 mm | 295 mm | +3.5 % |
| Circumference | 109.0" | 107.1" | -1.8 % |
| Revs per mile | 581 | 591 | +1.8 % |
| Axle height | 17.35" | 17.05" | -7.8 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/70R19. Fit 295/65R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.5 mph | -0.5 |
| 50 mph | 49.1 mph | -0.9 |
| 70 mph | 68.8 mph | -1.2 |
| 90 mph | 88.4 mph | -1.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,824 on the road, so it over-counts by 176. At a true 70 mph the first turns 678 times a minute, the second 690.