285/70R20 vs 295/70R20
Going from one to the other changes the overall height by +1.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/70R20 | 295/70R20 | Change |
|---|---|---|---|
| Overall height | 35.7" | 36.3" | +1.5 % |
| Sidewall | 7.85" | 8.13" | +3.5 % |
| Section width | 285 mm | 295 mm | +3.5 % |
| Circumference | 112.2" | 113.9" | +1.5 % |
| Revs per mile | 565 | 556 | -1.5 % |
| Axle height | 17.85" | 18.13" | +7.0 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/70R20. Fit 295/70R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.5 mph | +0.5 |
| 50 mph | 50.8 mph | +0.8 |
| 70 mph | 71.1 mph | +1.1 |
| 90 mph | 91.4 mph | +1.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,154 on the road, so it under-counts by 154. At a true 70 mph the first turns 659 times a minute, the second 649.