285/70R24.5 vs 265/80R24.5
Going from one to the other changes the overall height by +2.4 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/70R24.5 | 265/80R24.5 | Change |
|---|---|---|---|
| Overall height | 40.2" | 41.2" | +2.4 % |
| Sidewall | 7.85" | 8.35" | +6.3 % |
| Section width | 285 mm | 265 mm | -7.0 % |
| Circumference | 126.3" | 129.4" | +2.4 % |
| Revs per mile | 502 | 490 | -2.4 % |
| Axle height | 20.10" | 20.60" | +12.5 mm |
| Approved rim width | 8–10.5" | 7.5–9.5" | overlap 8–9.5" |
Both are approved on a rim 8" to 9.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/70R24.5. Fit 265/80R24.5 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.7 mph | +0.7 |
| 50 mph | 51.2 mph | +1.2 |
| 70 mph | 71.7 mph | +1.7 |
| 90 mph | 92.2 mph | +2.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,245 on the road, so it under-counts by 245. At a true 70 mph the first turns 585 times a minute, the second 571.