285/75R24.5 vs 295/70R24.5
Going from one to the other changes the overall height by -1.4 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 285/75R24.5 | 295/70R24.5 | Change |
|---|---|---|---|
| Overall height | 41.3" | 40.8" | -1.4 % |
| Sidewall | 8.42" | 8.13" | -3.4 % |
| Section width | 285 mm | 295 mm | +3.5 % |
| Circumference | 129.8" | 128.1" | -1.4 % |
| Revs per mile | 488 | 495 | +1.4 % |
| Axle height | 20.67" | 20.38" | -7.3 mm |
| Approved rim width | 8–10.5" | 8.5–11" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 285/75R24.5. Fit 295/70R24.5 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.6 mph | -0.4 |
| 50 mph | 49.3 mph | -0.7 |
| 70 mph | 69.0 mph | -1.0 |
| 90 mph | 88.8 mph | -1.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,862 on the road, so it over-counts by 138. At a true 70 mph the first turns 569 times a minute, the second 577.