295/35R16 vs 275/35R16
Going from one to the other changes the overall height by -2.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/35R16 | 275/35R16 | Change |
|---|---|---|---|
| Overall height | 24.1" | 23.6" | -2.3 % |
| Sidewall | 4.06" | 3.79" | -6.8 % |
| Section width | 295 mm | 275 mm | -6.8 % |
| Circumference | 75.8" | 74.1" | -2.3 % |
| Revs per mile | 836 | 855 | +2.3 % |
| Axle height | 12.06" | 11.79" | -7.0 mm |
| Approved rim width | 8.5–11" | 7.5–10" | overlap 8.5–10" |
Both are approved on a rim 8.5" to 10" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/35R16. Fit 275/35R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.9 mph | -1.1 |
| 70 mph | 68.4 mph | -1.6 |
| 90 mph | 87.9 mph | -2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,772 on the road, so it over-counts by 228. At a true 70 mph the first turns 975 times a minute, the second 998.