295/35R24 vs 305/30R24
Going from one to the other changes the overall height by -2.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/35R24 | 305/30R24 | Change |
|---|---|---|---|
| Overall height | 32.1" | 31.2" | -2.9 % |
| Sidewall | 4.06" | 3.60" | -11.4 % |
| Section width | 295 mm | 305 mm | +3.4 % |
| Circumference | 100.9" | 98.0" | -2.9 % |
| Revs per mile | 628 | 646 | +2.9 % |
| Axle height | 16.06" | 15.60" | -11.8 mm |
| Approved rim width | 8.5–11" | 8.5–11" | overlap 8.5–11" |
Both are approved on a rim 8.5" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/35R24. Fit 305/30R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.1 mph | -0.9 |
| 50 mph | 48.6 mph | -1.4 |
| 70 mph | 68.0 mph | -2.0 |
| 90 mph | 87.4 mph | -2.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,712 on the road, so it over-counts by 288. At a true 70 mph the first turns 732 times a minute, the second 754.