295/40R24 vs 305/35R24
Going from one to the other changes the overall height by -2.7 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/40R24 | 305/35R24 | Change |
|---|---|---|---|
| Overall height | 33.3" | 32.4" | -2.7 % |
| Sidewall | 4.65" | 4.20" | -9.5 % |
| Section width | 295 mm | 305 mm | +3.4 % |
| Circumference | 104.6" | 101.8" | -2.7 % |
| Revs per mile | 606 | 622 | +2.7 % |
| Axle height | 16.65" | 16.20" | -11.3 mm |
| Approved rim width | 8.5–11" | 8.5–11" | overlap 8.5–11" |
Both are approved on a rim 8.5" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/40R24. Fit 305/35R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.2 mph | -0.8 |
| 50 mph | 48.7 mph | -1.3 |
| 70 mph | 68.1 mph | -1.9 |
| 90 mph | 87.6 mph | -2.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,734 on the road, so it over-counts by 266. At a true 70 mph the first turns 707 times a minute, the second 726.
What drivers reported
Nobody has filed a complaint naming 295/40R24. 305/35R24 carries 1.