295/45R16 vs 285/50R16
Going from one to the other changes the overall height by +2.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/45R16 | 285/50R16 | Change |
|---|---|---|---|
| Overall height | 26.5" | 27.2" | +2.9 % |
| Sidewall | 5.23" | 5.61" | +7.3 % |
| Section width | 295 mm | 285 mm | -3.4 % |
| Circumference | 83.1" | 85.5" | +2.9 % |
| Revs per mile | 762 | 741 | -2.9 % |
| Axle height | 13.23" | 13.61" | +9.8 mm |
| Approved rim width | 8.5–11" | 8–10.5" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/45R16. Fit 285/50R16 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.9 mph | +0.9 |
| 50 mph | 51.5 mph | +1.5 |
| 70 mph | 72.0 mph | +2.0 |
| 90 mph | 92.6 mph | +2.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,290 on the road, so it under-counts by 290. At a true 70 mph the first turns 889 times a minute, the second 864.