295/45R22 vs 285/50R22
Going from one to the other changes the overall height by +2.4 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/45R22 | 285/50R22 | Change |
|---|---|---|---|
| Overall height | 32.5" | 33.2" | +2.4 % |
| Sidewall | 5.23" | 5.61" | +7.3 % |
| Section width | 295 mm | 285 mm | -3.4 % |
| Circumference | 102.0" | 104.4" | +2.4 % |
| Revs per mile | 621 | 607 | -2.4 % |
| Axle height | 16.23" | 16.61" | +9.8 mm |
| Approved rim width | 8.5–11" | 8–10.5" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/45R22. Fit 285/50R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.7 mph | +0.7 |
| 50 mph | 51.2 mph | +1.2 |
| 70 mph | 71.7 mph | +1.7 |
| 90 mph | 92.1 mph | +2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,237 on the road, so it under-counts by 237. At a true 70 mph the first turns 725 times a minute, the second 708.