295/50R20 vs 275/50R20
Going from one to the other changes the overall height by -2.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/50R20 | 275/50R20 | Change |
|---|---|---|---|
| Overall height | 31.6" | 30.8" | -2.5 % |
| Sidewall | 5.81" | 5.41" | -6.8 % |
| Section width | 295 mm | 275 mm | -6.8 % |
| Circumference | 99.3" | 96.8" | -2.5 % |
| Revs per mile | 638 | 654 | +2.5 % |
| Axle height | 15.81" | 15.41" | -10.0 mm |
| Approved rim width | 8.5–11" | 7.5–10" | overlap 8.5–10" |
Both are approved on a rim 8.5" to 10" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/50R20. Fit 275/50R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.8 mph | -1.2 |
| 70 mph | 68.3 mph | -1.7 |
| 90 mph | 87.8 mph | -2.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,751 on the road, so it over-counts by 249. At a true 70 mph the first turns 744 times a minute, the second 763.