295/50R24 vs 285/55R24
Going from one to the other changes the overall height by +2.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/50R24 | 285/55R24 | Change |
|---|---|---|---|
| Overall height | 35.6" | 36.3" | +2.0 % |
| Sidewall | 5.81" | 6.17" | +6.3 % |
| Section width | 295 mm | 285 mm | -3.4 % |
| Circumference | 111.9" | 114.2" | +2.0 % |
| Revs per mile | 566 | 555 | -2.0 % |
| Axle height | 17.81" | 18.17" | +9.3 mm |
| Approved rim width | 8.5–11" | 8–10.5" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/50R24. Fit 285/55R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 |
| 50 mph | 51.0 mph | +1.0 |
| 70 mph | 71.4 mph | +1.4 |
| 90 mph | 91.8 mph | +1.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,205 on the road, so it under-counts by 205. At a true 70 mph the first turns 661 times a minute, the second 647.