295/55R24 vs 275/60R24
Going from one to the other changes the overall height by +0.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/55R24 | 275/60R24 | Change |
|---|---|---|---|
| Overall height | 36.8" | 37.0" | +0.6 % |
| Sidewall | 6.39" | 6.50" | +1.7 % |
| Section width | 295 mm | 275 mm | -6.8 % |
| Circumference | 115.5" | 116.2" | +0.6 % |
| Revs per mile | 548 | 545 | -0.6 % |
| Axle height | 18.39" | 18.50" | +2.8 mm |
| Approved rim width | 8.5–11" | 7.5–10" | overlap 8.5–10" |
Both are approved on a rim 8.5" to 10" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/55R24. Fit 275/60R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.2 mph | +0.2 |
| 50 mph | 50.3 mph | +0.3 |
| 70 mph | 70.4 mph | +0.4 |
| 90 mph | 90.5 mph | +0.5 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,059 on the road, so it under-counts by 59. At a true 70 mph the first turns 640 times a minute, the second 636.