295/55R24 vs 285/55R24
Going from one to the other changes the overall height by -1.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/55R24 | 285/55R24 | Change |
|---|---|---|---|
| Overall height | 36.8" | 36.3" | -1.2 % |
| Sidewall | 6.39" | 6.17" | -3.4 % |
| Section width | 295 mm | 285 mm | -3.4 % |
| Circumference | 115.5" | 114.2" | -1.2 % |
| Revs per mile | 548 | 555 | +1.2 % |
| Axle height | 18.39" | 18.17" | -5.5 mm |
| Approved rim width | 8.5–11" | 8–10.5" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/55R24. Fit 285/55R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.6 mph | -0.4 |
| 50 mph | 49.4 mph | -0.6 |
| 70 mph | 69.2 mph | -0.8 |
| 90 mph | 88.9 mph | -1.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,882 on the road, so it over-counts by 118. At a true 70 mph the first turns 640 times a minute, the second 647.