295/60R17 vs 285/60R17
Going from one to the other changes the overall height by -1.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/60R17 | 285/60R17 | Change |
|---|---|---|---|
| Overall height | 30.9" | 30.5" | -1.5 % |
| Sidewall | 6.97" | 6.73" | -3.4 % |
| Section width | 295 mm | 285 mm | -3.4 % |
| Circumference | 97.2" | 95.7" | -1.5 % |
| Revs per mile | 652 | 662 | +1.5 % |
| Axle height | 15.47" | 15.23" | -6.0 mm |
| Approved rim width | 8.5–11" | 8–10.5" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/60R17. Fit 285/60R17 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.5 mph | -0.5 |
| 50 mph | 49.2 mph | -0.8 |
| 70 mph | 68.9 mph | -1.1 |
| 90 mph | 88.6 mph | -1.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,847 on the road, so it over-counts by 153. At a true 70 mph the first turns 761 times a minute, the second 772.