295/60R23 vs 285/65R23
Going from one to the other changes the overall height by +1.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/60R23 | 285/65R23 | Change |
|---|---|---|---|
| Overall height | 36.9" | 37.6" | +1.8 % |
| Sidewall | 6.97" | 7.29" | +4.7 % |
| Section width | 295 mm | 285 mm | -3.4 % |
| Circumference | 116.0" | 118.1" | +1.8 % |
| Revs per mile | 546 | 537 | -1.8 % |
| Axle height | 18.47" | 18.79" | +8.3 mm |
| Approved rim width | 8.5–11" | 8–10.5" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/60R23. Fit 285/65R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.5 mph | +0.5 |
| 50 mph | 50.9 mph | +0.9 |
| 70 mph | 71.2 mph | +1.2 |
| 90 mph | 91.6 mph | +1.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,176 on the road, so it under-counts by 176. At a true 70 mph the first turns 637 times a minute, the second 626.