295/60R24 vs 315/55R24
Going from one to the other changes the overall height by -0.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/60R24 | 315/55R24 | Change |
|---|---|---|---|
| Overall height | 37.9" | 37.6" | -0.8 % |
| Sidewall | 6.97" | 6.82" | -2.1 % |
| Section width | 295 mm | 315 mm | +6.8 % |
| Circumference | 119.2" | 118.3" | -0.8 % |
| Revs per mile | 532 | 536 | +0.8 % |
| Axle height | 18.97" | 18.82" | -3.8 mm |
| Approved rim width | 8.5–11" | 8.5–11.5" | overlap 8.5–11" |
Both are approved on a rim 8.5" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/60R24. Fit 315/55R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.8 mph | -0.2 |
| 50 mph | 49.6 mph | -0.4 |
| 70 mph | 69.5 mph | -0.5 |
| 90 mph | 89.3 mph | -0.7 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,922 on the road, so it over-counts by 78. At a true 70 mph the first turns 620 times a minute, the second 625.