295/65R22.5 vs 285/70R22.5
Going from one to the other changes the overall height by +1.6 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/65R22.5 | 285/70R22.5 | Change |
|---|---|---|---|
| Overall height | 37.6" | 38.2" | +1.6 % |
| Sidewall | 7.55" | 7.85" | +4.0 % |
| Section width | 295 mm | 285 mm | -3.4 % |
| Circumference | 118.1" | 120.0" | +1.6 % |
| Revs per mile | 536 | 528 | -1.6 % |
| Axle height | 18.80" | 19.10" | +7.8 mm |
| Approved rim width | 8.5–11" | 8–10.5" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/65R22.5. Fit 285/70R22.5 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.5 mph | +0.5 |
| 50 mph | 50.8 mph | +0.8 |
| 70 mph | 71.1 mph | +1.1 |
| 90 mph | 91.5 mph | +1.5 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,162 on the road, so it under-counts by 162. At a true 70 mph the first turns 626 times a minute, the second 616.