295/70R24 vs 275/75R24
Going from one to the other changes the overall height by -0.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/70R24 | 275/75R24 | Change |
|---|---|---|---|
| Overall height | 40.3" | 40.2" | -0.0 % |
| Sidewall | 8.13" | 8.12" | -0.1 % |
| Section width | 295 mm | 275 mm | -6.8 % |
| Circumference | 126.5" | 126.4" | -0.0 % |
| Revs per mile | 501 | 501 | +0.0 % |
| Axle height | 20.13" | 20.12" | -0.3 mm |
| Approved rim width | 8.5–11" | 7.5–10" | overlap 8.5–10" |
Both are approved on a rim 8.5" to 10" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/70R24. Fit 275/75R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.0 mph | -0.0 |
| 50 mph | 50.0 mph | -0.0 |
| 70 mph | 70.0 mph | -0.0 |
| 90 mph | 90.0 mph | -0.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,995 on the road, so it over-counts by 5. At a true 70 mph the first turns 584 times a minute, the second 585.