295/80R24.5 vs 305/75R24.5
Going from one to the other changes the overall height by -1.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 295/80R24.5 | 305/75R24.5 | Change |
|---|---|---|---|
| Overall height | 43.1" | 42.5" | -1.3 % |
| Sidewall | 9.29" | 9.01" | -3.1 % |
| Section width | 295 mm | 305 mm | +3.4 % |
| Circumference | 135.3" | 133.6" | -1.3 % |
| Revs per mile | 468 | 474 | +1.3 % |
| Axle height | 21.54" | 21.26" | -7.3 mm |
| Approved rim width | 8.5–11" | 8.5–11" | overlap 8.5–11" |
Both are approved on a rim 8.5" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 295/80R24.5. Fit 305/75R24.5 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.6 mph | -0.4 |
| 50 mph | 49.3 mph | -0.7 |
| 70 mph | 69.1 mph | -0.9 |
| 90 mph | 88.8 mph | -1.2 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,867 on the road, so it over-counts by 133. At a true 70 mph the first turns 546 times a minute, the second 553.