305/35R20 vs 295/35R20
Going from one to the other changes the overall height by -1.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 305/35R20 | 295/35R20 | Change |
|---|---|---|---|
| Overall height | 28.4" | 28.1" | -1.0 % |
| Sidewall | 4.20" | 4.06" | -3.3 % |
| Section width | 305 mm | 295 mm | -3.3 % |
| Circumference | 89.2" | 88.4" | -1.0 % |
| Revs per mile | 710 | 717 | +1.0 % |
| Axle height | 14.20" | 14.06" | -3.5 mm |
| Approved rim width | 8.5–11" | 8.5–11" | overlap 8.5–11" |
Both are approved on a rim 8.5" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 305/35R20. Fit 295/35R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.7 mph | -0.3 |
| 50 mph | 49.5 mph | -0.5 |
| 70 mph | 69.3 mph | -0.7 |
| 90 mph | 89.1 mph | -0.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,903 on the road, so it over-counts by 97. At a true 70 mph the first turns 828 times a minute, the second 836.