305/40R24 vs 325/35R24
Going from one to the other changes the overall height by -1.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 305/40R24 | 325/35R24 | Change |
|---|---|---|---|
| Overall height | 33.6" | 33.0" | -1.9 % |
| Sidewall | 4.80" | 4.48" | -6.8 % |
| Section width | 305 mm | 325 mm | +6.6 % |
| Circumference | 105.6" | 103.5" | -1.9 % |
| Revs per mile | 600 | 612 | +1.9 % |
| Axle height | 16.80" | 16.48" | -8.3 mm |
| Approved rim width | 8.5–11" | 9–12" | overlap 9–11" |
Both are approved on a rim 9" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 305/40R24. Fit 325/35R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.4 mph | -0.6 |
| 50 mph | 49.0 mph | -1.0 |
| 70 mph | 68.6 mph | -1.4 |
| 90 mph | 88.3 mph | -1.7 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,807 on the road, so it over-counts by 193. At a true 70 mph the first turns 700 times a minute, the second 714.