305/50R24 vs 285/50R24
Going from one to the other changes the overall height by -2.2 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 305/50R24 | 285/50R24 | Change |
|---|---|---|---|
| Overall height | 36.0" | 35.2" | -2.2 % |
| Sidewall | 6.00" | 5.61" | -6.6 % |
| Section width | 305 mm | 285 mm | -6.6 % |
| Circumference | 113.1" | 110.6" | -2.2 % |
| Revs per mile | 560 | 573 | +2.2 % |
| Axle height | 18.00" | 17.61" | -10.0 mm |
| Approved rim width | 8.5–11" | 8–10.5" | overlap 8.5–10.5" |
Both are approved on a rim 8.5" to 10.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 305/50R24. Fit 285/50R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.9 mph | -1.1 |
| 70 mph | 68.5 mph | -1.5 |
| 90 mph | 88.0 mph | -2.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,781 on the road, so it over-counts by 219. At a true 70 mph the first turns 653 times a minute, the second 668.