305/50R24 vs 295/55R24
Going from one to the other changes the overall height by +2.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 305/50R24 | 295/55R24 | Change |
|---|---|---|---|
| Overall height | 36.0" | 36.8" | +2.1 % |
| Sidewall | 6.00" | 6.39" | +6.4 % |
| Section width | 305 mm | 295 mm | -3.3 % |
| Circumference | 113.1" | 115.5" | +2.1 % |
| Revs per mile | 560 | 548 | -2.1 % |
| Axle height | 18.00" | 18.39" | +9.8 mm |
| Approved rim width | 8.5–11" | 8.5–11" | overlap 8.5–11" |
Both are approved on a rim 8.5" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 305/50R24. Fit 295/55R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 |
| 50 mph | 51.1 mph | +1.1 |
| 70 mph | 71.5 mph | +1.5 |
| 90 mph | 91.9 mph | +1.9 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,213 on the road, so it under-counts by 213. At a true 70 mph the first turns 653 times a minute, the second 640.