305/60R24 vs 295/65R24
Going from one to the other changes the overall height by +1.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 305/60R24 | 295/65R24 | Change |
|---|---|---|---|
| Overall height | 38.4" | 39.1" | +1.8 % |
| Sidewall | 7.20" | 7.55" | +4.8 % |
| Section width | 305 mm | 295 mm | -3.3 % |
| Circumference | 120.7" | 122.8" | +1.8 % |
| Revs per mile | 525 | 516 | -1.8 % |
| Axle height | 19.20" | 19.55" | +8.8 mm |
| Approved rim width | 8.5–11" | 8.5–11" | overlap 8.5–11" |
Both are approved on a rim 8.5" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 305/60R24. Fit 295/65R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.5 mph | +0.5 |
| 50 mph | 50.9 mph | +0.9 |
| 70 mph | 71.3 mph | +1.3 |
| 90 mph | 91.6 mph | +1.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,179 on the road, so it under-counts by 179. At a true 70 mph the first turns 613 times a minute, the second 602.