315/25R20 vs 335/25R20
Going from one to the other changes the overall height by +1.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 315/25R20 | 335/25R20 | Change |
|---|---|---|---|
| Overall height | 26.2" | 26.6" | +1.5 % |
| Sidewall | 3.10" | 3.30" | +6.3 % |
| Section width | 315 mm | 335 mm | +6.3 % |
| Circumference | 82.3" | 83.5" | +1.5 % |
| Revs per mile | 770 | 758 | -1.5 % |
| Axle height | 13.10" | 13.30" | +5.0 mm |
| Approved rim width | 8.5–11.5" | 9.5–12.5" | overlap 9.5–11.5" |
Both are approved on a rim 9.5" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 315/25R20. Fit 335/25R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.5 mph | +0.5 |
| 50 mph | 50.8 mph | +0.8 |
| 70 mph | 71.1 mph | +1.1 |
| 90 mph | 91.4 mph | +1.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,150 on the road, so it under-counts by 150. At a true 70 mph the first turns 898 times a minute, the second 885.