315/30R24 vs 335/25R24
Going from one to the other changes the overall height by -2.7 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 315/30R24 | 335/25R24 | Change |
|---|---|---|---|
| Overall height | 31.4" | 30.6" | -2.7 % |
| Sidewall | 3.72" | 3.30" | -11.4 % |
| Section width | 315 mm | 335 mm | +6.3 % |
| Circumference | 98.8" | 96.1" | -2.7 % |
| Revs per mile | 641 | 659 | +2.7 % |
| Axle height | 15.72" | 15.30" | -10.8 mm |
| Approved rim width | 8.5–11.5" | 9.5–12.5" | overlap 9.5–11.5" |
Both are approved on a rim 9.5" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 315/30R24. Fit 335/25R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.2 mph | -0.8 |
| 50 mph | 48.7 mph | -1.3 |
| 70 mph | 68.1 mph | -1.9 |
| 90 mph | 87.6 mph | -2.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,731 on the road, so it over-counts by 269. At a true 70 mph the first turns 748 times a minute, the second 769.