315/35R22 vs 325/35R22
Going from one to the other changes the overall height by +0.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 315/35R22 | 325/35R22 | Change |
|---|---|---|---|
| Overall height | 30.7" | 31.0" | +0.9 % |
| Sidewall | 4.34" | 4.48" | +3.2 % |
| Section width | 315 mm | 325 mm | +3.2 % |
| Circumference | 96.4" | 97.3" | +0.9 % |
| Revs per mile | 657 | 651 | -0.9 % |
| Axle height | 15.34" | 15.48" | +3.5 mm |
| Approved rim width | 8.5–11.5" | 9–12" | overlap 9–11.5" |
Both are approved on a rim 9" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 315/35R22. Fit 325/35R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.4 mph | +0.4 |
| 70 mph | 70.6 mph | +0.6 |
| 90 mph | 90.8 mph | +0.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,090 on the road, so it under-counts by 90. At a true 70 mph the first turns 767 times a minute, the second 760.