315/35R24 vs 325/35R24
Going from one to the other changes the overall height by +0.8 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 315/35R24 | 325/35R24 | Change |
|---|---|---|---|
| Overall height | 32.7" | 33.0" | +0.8 % |
| Sidewall | 4.34" | 4.48" | +3.2 % |
| Section width | 315 mm | 325 mm | +3.2 % |
| Circumference | 102.7" | 103.5" | +0.8 % |
| Revs per mile | 617 | 612 | -0.8 % |
| Axle height | 16.34" | 16.48" | +3.5 mm |
| Approved rim width | 8.5–11.5" | 9–12" | overlap 9–11.5" |
Both are approved on a rim 9" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 315/35R24. Fit 325/35R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.4 mph | +0.4 |
| 70 mph | 70.6 mph | +0.6 |
| 90 mph | 90.8 mph | +0.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,084 on the road, so it under-counts by 84. At a true 70 mph the first turns 720 times a minute, the second 714.