315/40R23 vs 325/35R23
Going from one to the other changes the overall height by -2.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 315/40R23 | 325/35R23 | Change |
|---|---|---|---|
| Overall height | 32.9" | 32.0" | -2.9 % |
| Sidewall | 4.96" | 4.48" | -9.7 % |
| Section width | 315 mm | 325 mm | +3.2 % |
| Circumference | 103.4" | 100.4" | -2.9 % |
| Revs per mile | 613 | 631 | +2.9 % |
| Axle height | 16.46" | 15.98" | -12.3 mm |
| Approved rim width | 8.5–11.5" | 9–12" | overlap 9–11.5" |
Both are approved on a rim 9" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 315/40R23. Fit 325/35R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.1 mph | -0.9 |
| 50 mph | 48.5 mph | -1.5 |
| 70 mph | 67.9 mph | -2.1 |
| 90 mph | 87.4 mph | -2.6 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,707 on the road, so it over-counts by 293. At a true 70 mph the first turns 715 times a minute, the second 736.