315/40R24 vs 335/40R24
Going from one to the other changes the overall height by +1.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 315/40R24 | 335/40R24 | Change |
|---|---|---|---|
| Overall height | 33.9" | 34.6" | +1.9 % |
| Sidewall | 4.96" | 5.28" | +6.3 % |
| Section width | 315 mm | 335 mm | +6.3 % |
| Circumference | 106.6" | 108.5" | +1.9 % |
| Revs per mile | 595 | 584 | -1.9 % |
| Axle height | 16.96" | 17.28" | +8.0 mm |
| Approved rim width | 8.5–11.5" | 9.5–12.5" | overlap 9.5–11.5" |
Both are approved on a rim 9.5" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 315/40R24. Fit 335/40R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.6 mph | +0.6 |
| 50 mph | 50.9 mph | +0.9 |
| 70 mph | 71.3 mph | +1.3 |
| 90 mph | 91.7 mph | +1.7 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,186 on the road, so it under-counts by 186. At a true 70 mph the first turns 694 times a minute, the second 681.