315/50R22 vs 295/50R22
Going from one to the other changes the overall height by -2.3 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 315/50R22 | 295/50R22 | Change |
|---|---|---|---|
| Overall height | 34.4" | 33.6" | -2.3 % |
| Sidewall | 6.20" | 5.81" | -6.3 % |
| Section width | 315 mm | 295 mm | -6.3 % |
| Circumference | 108.1" | 105.6" | -2.3 % |
| Revs per mile | 586 | 600 | +2.3 % |
| Axle height | 17.20" | 16.81" | -10.0 mm |
| Approved rim width | 8.5–11.5" | 8.5–11" | overlap 8.5–11" |
Both are approved on a rim 8.5" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 315/50R22. Fit 295/50R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.3 mph | -0.7 |
| 50 mph | 48.9 mph | -1.1 |
| 70 mph | 68.4 mph | -1.6 |
| 90 mph | 87.9 mph | -2.1 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,771 on the road, so it over-counts by 229. At a true 70 mph the first turns 684 times a minute, the second 700.