315/50R22 vs 295/55R22
Going from one to the other changes the overall height by +1.1 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 315/50R22 | 295/55R22 | Change |
|---|---|---|---|
| Overall height | 34.4" | 34.8" | +1.1 % |
| Sidewall | 6.20" | 6.39" | +3.0 % |
| Section width | 315 mm | 295 mm | -6.3 % |
| Circumference | 108.1" | 109.3" | +1.1 % |
| Revs per mile | 586 | 580 | -1.1 % |
| Axle height | 17.20" | 17.39" | +4.8 mm |
| Approved rim width | 8.5–11.5" | 8.5–11" | overlap 8.5–11" |
Both are approved on a rim 8.5" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 315/50R22. Fit 295/55R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.5 mph | +0.5 |
| 70 mph | 70.8 mph | +0.8 |
| 90 mph | 91.0 mph | +1.0 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,109 on the road, so it under-counts by 109. At a true 70 mph the first turns 684 times a minute, the second 677.