315/50R23 vs 335/45R23
Going from one to the other changes the overall height by -1.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 315/50R23 | 335/45R23 | Change |
|---|---|---|---|
| Overall height | 35.4" | 34.9" | -1.5 % |
| Sidewall | 6.20" | 5.94" | -4.3 % |
| Section width | 315 mm | 335 mm | +6.3 % |
| Circumference | 111.2" | 109.5" | -1.5 % |
| Revs per mile | 570 | 578 | +1.5 % |
| Axle height | 17.70" | 17.44" | -6.8 mm |
| Approved rim width | 8.5–11.5" | 9.5–12.5" | overlap 9.5–11.5" |
Both are approved on a rim 9.5" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 315/50R23. Fit 335/45R23 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.5 mph | -0.5 |
| 50 mph | 49.2 mph | -0.8 |
| 70 mph | 68.9 mph | -1.1 |
| 90 mph | 88.6 mph | -1.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,850 on the road, so it over-counts by 150. At a true 70 mph the first turns 665 times a minute, the second 675.