315/60R20 vs 295/60R20
Going from one to the other changes the overall height by -2.7 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 315/60R20 | 295/60R20 | Change |
|---|---|---|---|
| Overall height | 34.9" | 33.9" | -2.7 % |
| Sidewall | 7.44" | 6.97" | -6.3 % |
| Section width | 315 mm | 295 mm | -6.3 % |
| Circumference | 109.6" | 106.6" | -2.7 % |
| Revs per mile | 578 | 594 | +2.7 % |
| Axle height | 17.44" | 16.97" | -12.0 mm |
| Approved rim width | 8.5–11.5" | 8.5–11" | overlap 8.5–11" |
Both are approved on a rim 8.5" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 315/60R20. Fit 295/60R20 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.2 mph | -0.8 |
| 50 mph | 48.6 mph | -1.4 |
| 70 mph | 68.1 mph | -1.9 |
| 90 mph | 87.6 mph | -2.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,729 on the road, so it over-counts by 271. At a true 70 mph the first turns 675 times a minute, the second 693.