315/65R19 vs 325/65R19
Going from one to the other changes the overall height by +1.5 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 315/65R19 | 325/65R19 | Change |
|---|---|---|---|
| Overall height | 35.1" | 35.6" | +1.5 % |
| Sidewall | 8.06" | 8.32" | +3.2 % |
| Section width | 315 mm | 325 mm | +3.2 % |
| Circumference | 110.3" | 111.9" | +1.5 % |
| Revs per mile | 574 | 566 | -1.5 % |
| Axle height | 17.56" | 17.82" | +6.5 mm |
| Approved rim width | 8.5–11.5" | 9–12" | overlap 9–11.5" |
Both are approved on a rim 9" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 315/65R19. Fit 325/65R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.4 mph | +0.4 |
| 50 mph | 50.7 mph | +0.7 |
| 70 mph | 71.0 mph | +1.0 |
| 90 mph | 91.3 mph | +1.3 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,146 on the road, so it under-counts by 146. At a true 70 mph the first turns 670 times a minute, the second 660.