315/65R24 vs 325/60R24
Going from one to the other changes the overall height by -1.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 315/65R24 | 325/60R24 | Change |
|---|---|---|---|
| Overall height | 40.1" | 39.4" | -1.9 % |
| Sidewall | 8.06" | 7.68" | -4.8 % |
| Section width | 315 mm | 325 mm | +3.2 % |
| Circumference | 126.0" | 123.6" | -1.9 % |
| Revs per mile | 503 | 512 | +1.9 % |
| Axle height | 20.06" | 19.68" | -9.8 mm |
| Approved rim width | 8.5–11.5" | 9–12" | overlap 9–11.5" |
Both are approved on a rim 9" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 315/65R24. Fit 325/60R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.4 mph | -0.6 |
| 50 mph | 49.0 mph | -1.0 |
| 70 mph | 68.7 mph | -1.3 |
| 90 mph | 88.3 mph | -1.7 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,809 on the road, so it over-counts by 191. At a true 70 mph the first turns 586 times a minute, the second 598.