325/25R24 vs 305/30R24
Going from one to the other changes the overall height by +2.7 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/25R24 | 305/30R24 | Change |
|---|---|---|---|
| Overall height | 30.4" | 31.2" | +2.7 % |
| Sidewall | 3.20" | 3.60" | +12.6 % |
| Section width | 325 mm | 305 mm | -6.2 % |
| Circumference | 95.5" | 98.0" | +2.7 % |
| Revs per mile | 663 | 646 | -2.7 % |
| Axle height | 15.20" | 15.60" | +10.3 mm |
| Approved rim width | 9–12" | 8.5–11" | overlap 9–11" |
Both are approved on a rim 9" to 11" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/25R24. Fit 305/30R24 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.8 mph | +0.8 |
| 50 mph | 51.3 mph | +1.3 |
| 70 mph | 71.9 mph | +1.9 |
| 90 mph | 92.4 mph | +2.4 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,266 on the road, so it under-counts by 266. At a true 70 mph the first turns 774 times a minute, the second 754.