325/30R19 vs 335/30R19
Going from one to the other changes the overall height by +0.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/30R19 | 335/30R19 | Change |
|---|---|---|---|
| Overall height | 26.7" | 26.9" | +0.9 % |
| Sidewall | 3.84" | 3.96" | +3.1 % |
| Section width | 325 mm | 335 mm | +3.1 % |
| Circumference | 83.8" | 84.6" | +0.9 % |
| Revs per mile | 756 | 749 | -0.9 % |
| Axle height | 13.34" | 13.46" | +3.0 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/30R19. Fit 335/30R19 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 30.3 mph | +0.3 |
| 50 mph | 50.4 mph | +0.4 |
| 70 mph | 70.6 mph | +0.6 |
| 90 mph | 90.8 mph | +0.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 10,089 on the road, so it under-counts by 89. At a true 70 mph the first turns 882 times a minute, the second 874.
What drivers reported
325/30R19 carries 1 complaints. Nobody has filed one naming 335/30R19.