325/35R18 vs 345/30R18
Going from one to the other changes the overall height by -3.0 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/35R18 | 345/30R18 | Change |
|---|---|---|---|
| Overall height | 27.0" | 26.1" | -3.0 % |
| Sidewall | 4.48" | 4.07" | -9.0 % |
| Section width | 325 mm | 345 mm | +6.2 % |
| Circumference | 84.7" | 82.2" | -3.0 % |
| Revs per mile | 748 | 771 | +3.0 % |
| Axle height | 13.48" | 13.07" | -10.3 mm |
| Approved rim width | 9–12" | 9.5–12.5" | overlap 9.5–12" |
Both are approved on a rim 9.5" to 12" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/35R18. Fit 345/30R18 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.1 mph | -0.9 |
| 50 mph | 48.5 mph | -1.5 |
| 70 mph | 67.9 mph | -2.1 |
| 90 mph | 87.3 mph | -2.7 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,701 on the road, so it over-counts by 299. At a true 70 mph the first turns 873 times a minute, the second 900.