325/35R22 vs 315/35R22
Going from one to the other changes the overall height by -0.9 %. That is inside the 3% band, so it fits and the speedometer stays close.
Side by side
| Measure | 325/35R22 | 315/35R22 | Change |
|---|---|---|---|
| Overall height | 31.0" | 30.7" | -0.9 % |
| Sidewall | 4.48" | 4.34" | -3.1 % |
| Section width | 325 mm | 315 mm | -3.1 % |
| Circumference | 97.3" | 96.4" | -0.9 % |
| Revs per mile | 651 | 657 | +0.9 % |
| Axle height | 15.48" | 15.34" | -3.5 mm |
| Approved rim width | 9–12" | 8.5–11.5" | overlap 9–11.5" |
Both are approved on a rim 9" to 11.5" wide. If yours is in that band, this is a tire change and nothing else.
What the speedometer will say
Calibrated for 325/35R22. Fit 315/35R22 and the needle stops telling the truth.
| Needle says | You are doing | Out by |
|---|---|---|
| 30 mph | 29.7 mph | -0.3 |
| 50 mph | 49.6 mph | -0.4 |
| 70 mph | 69.4 mph | -0.6 |
| 90 mph | 89.2 mph | -0.8 |
The odometer drifts with it. Ten thousand miles on the dial are really 9,911 on the road, so it over-counts by 89. At a true 70 mph the first turns 760 times a minute, the second 767.